Seeland Heat waistcoat



The Seeland Heat vest is made of a lined lightweight fabric with stretch membranes at the sides. On the inside, it has a heat-reflecting lining that not only prevents heat loss, but also enhances the effect of the vest's heat membranes. The high collar is lined with soft fleece fabric. In the places on the upper body that are most exposed to cold - on the lower back and between the back pieces - heat membranes are sewn in. By using the associated smartphone app, these heating membranes can be set to a desired temperature between 30C and 52C, as required. In addition, the diaphragms can be set to 38C, 46C or 52C by using the push button on the chest, so you are not dependent on your smartphone. Unlike the older heating technologies available on the market, the heating membranes in the Seeland Heat vest are so flexible that they can be folded and packed together with the clothes in which they are sewn in. You can even machine wash the vest without any problems. In the vest's right pocket there is a waterproof USB connector, which can be connected to a powerbank according to your own wishes and strength. With a power bank of 10,000mAh, the vest can provide the highest temperature of 52C for approx. 7 hours when the outdoor temperature is 0C. When the vest has reached the desired temperature, the heating membranes automatically go to sleep to save power. Then the heating membranes switch on again by themselves if the temperature drops 1-2 degrees below the level set for the vest. The vest is heat-regulating in this way, so the heating membranes automatically switch off if, for example, you get the heat because you move a lot, and switch on again if you stand or sit still. In the vest, there is an inner pocket and two side pockets, and a waterproof drybag is included to pack the vest in.

Facts